Table of Contents
Advertisement
3 Part 2 - Traditional wheel end with 3-4 planets
Spindle fitted with interference
Fig. 3.9
Fig. 3.10
Fig. 3.11
50
Meritor Wheel end assembly
7. Introduce the axle shaft into the housing Fig. 3.9
Hub assembly
Fit the sun gear with spring washers and thrust washer and retain
with an internal circlip. Fig. 3.10
Fit the hub casing onto the hub ensuring that the hub external O-
ring is thoroughly lubricated using hub oil. Fig. 3.11
Retain the hub casing in position with two socket bolts using
thread locking compound (Loctite 243). Fig. 3.12
Tighten bolts to a torque of: 40 ± 10 Nm - Fig. 3.13
Fig. 3.12
Fig. 3.13
Advertisement
Table of Contents
