Meritor MM-0164 Maintenance Manual page 16

Hide thumbs Also See for MM-0164:

Table of Contents

2 Part 1 - Hub reduction with 3 - 4 planets

Wheel end with unitized bearing

The current Meritor wheel end assembly is based on with star nut

solution.

NOTE

: A high torque is required to shear the staking points and

a torque multiplication device should be employed. Fig. 2.10

Remove the hub nut and discard.

Star hub nut dismantling

Remove locking screw and discard. Unscrew the hub retaining nut

and discard. Fig. 2.11

Nut cannot be reused because the anti-friction coating on the hub

nut face maybe damaged.

NOTE

: A high torque is required to release the nut, therefore a

torque multiplication device should be employed.

Meritor Wheel end assembly

Fig. 2.9

Fig. 2.10

Fig. 2.11

Star Nut

Table of Contents

Need help?

Do you have a question about the MM-0164 and is the answer not in the manual?