Table of Contents
Advertisement
2 Part 3 - Traditional wheel end with 3-4 planets
Spindle fitted with screws
Fig. 2.5
Remove cover retainer screws with suitable sized wrench and
remove the hub cover from the end of the hub casing - Fig. 2.5
Remove the retaining ring sun gear and spring washers from axle
shaft - Fig. 2.6
Remove the 2 sunk head screws M10X25 - Fig. 2.7
Remove the hub casing group and remove axle shaft - Fig. 2.8
Fig. 2.8
Retaining ring
Sun gear
Fig. 2.6
Fig. 2.7
Meritor Wheel end assembly
65
Advertisement
Table of Contents
