Table of Contents
Advertisement
2 Part 2 - Traditional wheel end with 3-4 planets
Spindle fitted with interference
Fig. 2.15
Fig. 2.16
Fig. 2.17
44
Meritor Wheel end assembly
6. If the axle has an ABS sensor proceed as shown here below
otherwise move to point 10.
7. Disconnect ABS sensor cable completely and remove it.
8. Untighten the brackets. Fig. 2.15
9. If needed, replace the ABS sensor. Figg. 2.16 - 2.17
Advertisement
Table of Contents
