Figure 7-2 Substream Recording Settings - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide

Figure 7-2 Substream Recording Settings

This Substream recording settings configuration needs to be done for each individual camera channel
separately.
The following options will be available for configuration:
Choose Channel – drop-down list to select the particular channel to configure. When a channel
is selected, the corresponding recording settings for that channel will be displayed for viewing
and editing.
Enable Channel – checkbox, if selected, would enable the Substream recording on this channel.
If unselected, it would mean that video from this channel would not be recorded and stored as
part of the Substream.
Enable Audio – checkbox, if selected, would include audio into the recording. If unselected,
there would be no audio recorded for this channel.
Choose Resolution – drop-down list to select the resolution to record this channel at. Available
resolution options are QCIF (176x120), CIF (352x240), HD1 (704x240).
Choose Frame Rate – drop-down list allowing you to select the frame rate (in terms of frames
per second) that you would like to record at.
Choose Quality – drop-down list allowing you to select the encoding quality (on a scale of 1
to 8 – where 1 is best).
Select Copy to Channel – this feature allows you to copy the current channel's Substream
recording settings directly to another channel, thus allowing you to easily and quickly replicate
the Substream recording settings across channels. Once you have selected the channel to copy
to, click on the (Copy) button to make the copy.
Copy Settings – click the (Copy) button to copy the current settings to the selected channel.
Save Settings – click the (OK) button to save the current settings for the channel.
Back to Previous – click the (Cancel) button to exit back to the previous screen without saving.
135 of 148