Gatekeeper Y58 User Manual & Installation Manual page 95

Y58 User Manual & Install Guide
Quality
Record Mode
Drop-down list allowing you to select the
encoding quality (on a scale of 1 to 8 – where 1
is best).
DEFAULT SETTINGS:
For all channels, set the following:
1 (Best)
Drop-down list allowing you to select the
record mode:
Power Up – the device will record
whenever it is powered on.
Timer – the
following the configured schedule.
Alarm – the device will record
whenever there is an alarm event
detected.
If the Record Mode selected is Timer, a
(Schedule) button will be enabled. Click this
button to display the schedule management
screen. You will be able to perform the
following functions:
Add a Plan – use the drop-down list to
select a day of the week (from Sunday
to Saturday). Clicking the (Add a Plan)
button will then add a timer recording
schedule to the task list.
Start Time – this is a time field that
allows you to set the starting time to
begin the recording.
End Time – this is a time field that
allows you to set the ending time to
stop the recording.
Video Type – this is a drop-down list
that allows you to select the type of
video to be recorded (either Normal
video, or Alarm video only).
x – you can always click the (x) button
to remove the associated recording
task from the list.
Copy To – this feature allows you to
copy the current timer recording
settings scheduled for any particular
day to another day, thus allowing you
to easily and quickly replicate the timer
recording schedule settings. Once you
have selected the day to copy to, click
on the (Copy) button to make the
copy.
device will record
95 of 148