Maintenance And Troubleshooting - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide

8 Maintenance and Troubleshooting

Maintenance
Whilst the Y58 is a dependable and robust piece of equipment, it is still a complex electronic device and
as such, will require maintenance occasionally. To ensure optimal performance, Gatekeeper Systems
strongly recommends that a proper Preventive Maintenance Schedule be set up and adhered to.
Besides that, it is recommended that the following seven basic maintenance steps be performed at least
twice a year:
No.
1 Check that there are no loose mounting screws and that the Y58 is still securely
mounted.
2 Wipe down the Y58 and cameras using a clean microfiber cloth.
3 Check cables on the back of the Y58 to ensure they have not vibrated loose.
Make sure that the cables do not show signs of wear, cracks, etc. If so, contact
your Gatekeeper Systems sales representative to arrange for replacements.
4 Pull out the Hard Drive and check to ensure that the Y58 has been recording
video. It is critical that the Y58 is powered down prior to the removal of the
Hard Drive.
5 Check that the cameras are still positioned properly by playing back the
recorded video.
6 Check the system clock to ensure the proper date and time is shown. Be sure
to check that daylight savings time is set properly and the system time is not
out by an hour.
7 Verify that the settings for the Y58 and the cameras are still set properly.
Maintenance Item
Check
( )
138 of 148