Gatekeeper Y58 User Manual & Installation Manual page 77

Y58 User Manual & Install Guide
Sleep Sleep Mode
DVR Voltage Setup
Shutdown Voltage
Threshold
Power Up Voltage
Threshold
Low Volt Upload
Drop-down list to select the sleep mode option
for the device:
No Consumption Standby
Low Power Standby
Notes:
- Currently, this is the only option available.
DEFAULT SETTINGS:
No Consumption Standby
This means that the device will not be
consuming battery power when it is shut down.
Checkbox – selecting this option will enable the
device to change the values in Shutdown
Voltage Threshold and Power Up Voltage
Threshold.
DEFAULT SETTINGS:
Checkbox – Unselected
Numeric text field to set the Shutdown voltage
threshold. If DVR Voltage Setup is selected, the
device will turn off when the battery voltage is
detected to be consistently below
threshold value.
DEFAULT SETTINGS:
Disabled/not applicable.
When the vehicle battery recovers its charge
and is consistently above this threshold value,
the device will automatically turn on again.
DEFAULT SETTINGS:
Disabled/not applicable.
Checkbox – selected will enable the device to
log and report if a low voltage situation occurs.
DEFAULT SETTINGS:
Checkbox – Unselected
this
77 of 148