Gatekeeper Y58 User Manual & Installation Manual page 87

Y58 User Manual & Install Guide
COL
SAT
Channel Being Configured: This drop-down list enables you to select a channel to configure.
The video from the selected channel will be displayed, and you will be able to adjust the
settings. Each channel can have specific settings, and you will need to adjust each in turn.
Copy To Channel: In multi-camera installations, this feature allows you to easily copy the
configuration of one camera channel to another channel, or even overwrite all channels with
the settings from the currently selected channel. Use the drop-down list to select the camera
channel that you wish to overwrite with the current settings.
Copy Settings: After selecting the camera channel that you wish to overwrite with the current
settings, clicking the (Copy) button will proceed to do so.
Revert to Defaults: Click the (Default) button to revert the settings to the factory defaults.
Save Settings: Click the (Save) button to save the settings to the currently selected camera
channel.
Exit this Menu: Click the (Exit) button to return to the previous screen. Please note that you
will lose any changes unless you first save the settings.
Margins
: Colour Warmth
: Colour Saturation
This button displays the margin setup screen which has the following
options:
Margin-top
Margin-bottom
Margin-left
Margin-right
You may use the (+) and (-) buttons or click and drag the slider knob
to adjust the margins of the screen to fit the display within the
limitations of your display monitor. This is especially useful if you find
that parts of the display are off-screen.
87 of 148