Maintenance Settings - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide

6.6 Maintenance Settings

This section allows the user to perform various maintenance operations such as import and export of
data and configuration files, firmware upgrades, and storage media formatting.
Output Delay Time – numeric text field to set
the delay time for the IO output (in seconds).
Linkage Screen – drop-down list to select the
options to display the video from the selected
cameras on-screen when the alarm occurs.
None
Single
Dual
Quad
If Single (1x1), Dual (2x1) or Quad (2x2) display
is selected, the (Setup) button allows you to
select the layout of the channels to be displayed
on-screen.
The drop-down lists are shown on-screen
according to the grid layout mode selected. You
can easily choose each individual camera
channel to be displayed in the selected grid
segment visually. If you have less cameras than
available grid segments, then those segments
associated with an actual camera will be
displayed as a black box.
Alarm Image Upload – checkbox, if selected
will enable the device to upload the alarm to the
centre server.
PB Alarm Duration – numeric text field to set
the duration of the video playback (in seconds)
when the alarm occurs.
Alarm Snap – checkbox – if selected, when the
alarm occurs, the device will take snapshots
using the selected cameras.
DEFAULT SETTINGS:
Disabled/not applicable.
Navigate to: Main Menu
: Not displayed
: Display 1 camera.
: Display 2 cameras.
: Display 4 cameras.
Setup Maintenance
127 of 148