Step 7: Setting Up Authorised Users - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide
After that, you need to select the preferred speed measurement unit which will be used by the device.
Navigate to: Main Menu
Please verify that the following default settings are correctly configured. For a detailed explanation of
each setting, please see
Speed

4.7 Step 7: Setting Up Authorised Users

Next, you can add additional user login accounts to the device if required.
Your Y58 comes pre-configured with the following two default user accounts:
Timer From
Light off Time
Setup Collection
Section 6.5.1.
Unit
Source
Navigate to:
Please change this setting to reflect the
preferred duration of time you wish to continue
recording after the vehicle is turned off.
DEFAULT SETTINGS:
300
DEFAULT SETTINGS:
8:00:00 To 18:00:00
The ICD display and lights will turn off after the
set time.
DEFAULT SETTINGS:
Never
General Speed
Please set the preferred speed measurement
unit used in your region of operations.
Fleets operating in North America will typically
use MPH. Fleets operating in most other parts
of the world (including Canada) where the
metric system is adopted will typically choose
KM/H.
DEFAULT SETTINGS:
MPH
Source to detect the speed of the vehicle.
DEFAULT SETTINGS:
Satellite
Main Menu Setup Basic Setup User Setup
43 of 148