Gatekeeper Y58 User Manual & Installation Manual page 121

Y58 User Manual & Install Guide
Motion Name
Enable
Alarm
Type
Trigger
Linkage
grid segments, then those segments associated with an actual camera will be
displayed as a black box.
Alarm Image Upload – checkbox, if selected will enable the device to
upload the alarm to the centre server.
Set to Motion.
Enables whether or not motion detection will be enabled.
Default settings:
Unselected.
Sets whether or not Motion detection will be triggered by an Event or an Alarm.
Default settings:
Alarm.
Setup: Click the setup button and a separate window will appear for Motion
detection setup. In this window several options are available. Select the channel
on which you want the motion detection to be recorded. The area setup button
of the selected channel will display a grid pattern. Select the area required to
be covered by Motion detection.
Setup: When the setup button is selected a separate window
will appear with options with multiple choices.
121 of 148