Gatekeeper Y58 User Manual & Installation Manual page 74

Y58 User Manual & Install Guide
DST Enable
Offset
Mode
Start
Note:
- This setting requires a constant network
connection either via cellular or Wi-Fi.
DEFAULT SETTINGS:
Checkbox – Unselected
Checkbox – selecting this will enable the device
to calculate and adjust for daylight savings
time.
DEFAULT SETTINGS:
Checkbox – Selected
Drop-down list which allows you to choose the
offset value to be used for the daylight savings
calculation:
One Hour (system will offset the time
by an hour when daylight savings is
active)
Two Hours (system will offset the time
by two hours when daylight savings is
active)
DEFAULT SETTINGS:
One Hour
Drop-down list which allows you to choose the
mode to be used for the daylight savings
calculation:
Week (enable the system to activate
daylight savings based on a specified
day of the week in the year)
Date (set an actual hard date for when
daylight savings is active)
DEFAULT SETTINGS:
Week
This is a set of fields which allow you to choose
the starting point of the period for which the
device will adjust for daylight savings time.
74 of 148