The Y58 Start-Up Screen Layout - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide
No.
9 Jump to the main menu.
10 Jump to a particular
channel.
11 Cycle to the next
channel.
12 Playback controls for
video.

3.3 The Y58 Start-up Screen Layout

Upon start-up, the screen of the Y58 will display the live video streams from the various cameras
attached to the Y58. Users can select and configure how many video channels to be displayed on the
screen for monitoring purposes. The screen also serves as an interface into the menu system of the Y58
where users can playback recorded video and access the configuration menu to change the device
configuration settings.
The screen layout will stay the same regardless of whether an ICD2 is being used, or an LCD monitor
being used along with a Finger Mouse. This ensures that the user always has a familiar interface and
consistent methodology to interact with the menu system and device functions.
Action
Not applicable. Use the on-
screen controls.
Not applicable. Use the on-
screen controls.
Not applicable. Use the on-
screen controls.
When you are viewing video
playback, press the Right
Button to display/hide the
on-screen video playback
controls.
You may then use the on-
screen controls to adjust the
video playback.
Finger Mouse ICD2
Note that at any other
screen, the Exit button
returns you to the previous
screen.
Press the Menu button on
the ICD2.
While viewing a video, press
any one of the numbered
buttons (from 1 to 9) on the
numeric keypad of the ICD2,
or double-tap the channel
on the screen to switch to
the corresponding channel.
Press the (0) button on the
numeric keypad of the ICD2.
When you are viewing video
playback, tap anywhere on
the screen to display/hide
the on-screen video
playback controls.
You may then use the on-
screen controls to adjust the
video playback.
24 of 148