Step 4: Setting The Date And Time; Figure 4-2 Setup Menu System For Device Configuration - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide

Figure 4-2 Setup Menu System for Device Configuration

For the basic setup process, we will just need to verify and/or configure the settings in the subsections
highlighted with the red dotted lines in the diagram, as follows:
Under the Basic section:
Regist Info
Time Setup
Startup
User Setup
Network
Application
Other setup
Under the Surveillance section:
Live View
Record
IPC Setup

4.4 Step 4: Setting the Date and Time

The first step is to ensure that the date and time are set correctly in the device.
Navigate to: Main Menu
Please verify that the following default settings are correctly configured. For a detailed explanation of
each setting, please see
General
Time Sync
Setup Basic Setup
Section 6.3.2.
Date Format
Time Format
Time Zone
Date/Time
Time Setup
DEFAULT SETTINGS:
MONTH/DAY/YEAR
DEFAULT SETTINGS:
24 Hours
If this is not your time zone, please change this
setting as appropriate to the actual time zone
that your fleet will be operating in.
DEFAULT SETTINGS:
(GMT-08:00) PACIFIC TIME (US &
CANADA)
Please verify the time and date.
If the time and/or date is not correct, please
change them to the correct values.
40 of 148