G4-504HD2a User Guide
Click the ( Setup ) button to set up the recording options for the substream.
This substream recording settings configuration needs to be done for each individual camera channel
separately.
The following options will be available for configuration:
Choose Channel – drop list to select the particular channel to configure. When a channel is
▪
selected, the corresponding recording settings for that channel will be displayed for viewing
and editing.
Enable Channel – checkbox, if selected, would enable the substream recording on this channel.
▪
If unselected, would mean that video from this channel would not be recorded and stored as
part of the substream.
Enable Audio – checkbox, if selected, would include audio into the recording. If unselected,
▪
there would be no audio recorded for this channel.
Choose Resolution – drop list to select the resolution to record this channel at. Available
▪
resolution options are QCIF (176x120), CIF (352x240), HD1 (704x240) and D1 (704x480).
Choose Frame Rate – drop list allowing you to select the frame rate (in terms of frames per
▪
second) that you would like to record at.
Choose Quality – drop list allowing you to select the encoding quality (on a scale of 1 to 8 –
▪
where 1 is best).
Select Copy To Channel – this feature allows you to copy the current channel's substream
▪
recording settings directly to another channel, thus allowing you to easily and quickly replicate
Special Topics
Figure 7-4 Substream Recording Settings
131 of 151