Gatekeeper Y58 User Manual & Installation Manual page 94

Y58 User Manual & Install Guide
Encode Standard
Frame Rate
HD1 (704x240)
WHD1 (928x240)
D1 (704x480)
WD1 (928x480)
720p (1280x720)
1080p (1920x1080)
For the Analog HD cameras (channels 1-6) and
Digital IP Camera (channel 7 and channel 8), the
drop-down list contents will change to reflect
the supported resolutions of the currently
attached Analog HD and IP cameras. Most
commonly, these will typically be:
720P (1280x720)
1080p (1920x1080)
For the Digital IP Camera, 7 and 8, the Drop-
down list contents will change to reflect the
supported resolutions of the currently attached
IP camera. Most commonly, these will typically
be:
720P (1280x720)
1080P (1920x1080)
DEFAULT SETTINGS:
For channels 1 to 6 (Analog camera channels),
set the following:
D1
For channel 7 and 8 (IP camera channel), set the
following:
720P
DEFAULT SETTINGS:
H264
Note – Read GLOSSARY
Drop-down list allowing you to select the frame
rate (in terms of frames per second) that you
would like to record at.
DEFAULT SETTINGS:
For all channels, set the following:
15
for more information.
94 of 148