Gatekeeper Y58 User Manual & Installation Manual page 106

Y58 User Manual & Install Guide
Mileage
Flow Limit
Unit
Source
Total
Base Value
Operation
Default, no limit
Custom
Temperature
system is adopted will typically choose
KM/H.
DEFAULT SETTINGS:
MPH
Drop-down list allowing the user to set the
source for the speed measurement:
Satellite
Pulse
OBD
Notes:
- If the measurement unit is set to Pulse, you
will also need to select the calibration mode
and perform a manual calibration.
DEFAULT SETTINGS:
Satellite
Displays the total mileage which the vehicle has
travelled.
Sets the mileage of the vehicle on the first day
of service on that route. This value can be
entered manually.
Correct: Allows the current mileage of the
vehicle to be entered.
Clear: Resets the mileage of the vehicle to 0.
Determines the limit for cellular data control.
No limit means that the data will flow at its
maximum attainable rate.
DEFAULT SETTINGS:
Unchecked
Restricts the amount of data flowing through a
cellular connection.
E.G. if set to 512Kbps when using GV4+ and
Live View the G4-504HD1a will control the bit
rate for all channels ensuring that it will not
exceed 512Kbps
DEFAULT SETTINGS:
Unchecked
Click on the "?" to get the more information.
106 of 148