Upgrade - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide

6.6.3 Upgrade

This subsection enables you to upgrade the firmware for selected system components.
Please Note: If you are using the Finger Mouse/LCD combination to navigate you will need to use
a Gatekeeper Systems USB Hub to allow two devices to share the one USB port.
Upgrade
File Type
Navigate to:
Device Upgrade
ICD2 Upgrade
IPC Upgrade
Time – time field to select the end time
of the specified time period.
Notes:
- Start time is only applicable if exporting
data using the Export Time option
Drop-down list which allows you to specify the
type of data to be exported:
Captured Picture
Alarm Log
Operation Log
Blackbox Data
Main Menu Setup
Click the (Upgrade) button to retrieve the
device update from a file and apply it to the
system. You will need a compatible update file
saved on an external storage device (most
commonly a USB flash drive attached to the
device USB port).
Click the (Upgrade) button to retrieve the CP4
update from a file and apply it to the system.
You will need a compatible update file saved on
an external storage device (most commonly a
USB flash drive attached to the device USB
port).
Click the (Upgrade) button to retrieve the IPC
update from a file, and select the target IPC
camera in order to apply the update to it. You
will need a compatible update file saved on an
external storage device (most commonly a USB
flash drive attached to the device USB port).
Maintenance Upgrade
130 of 148