Gatekeeper Y58 User Manual & Installation Manual page 89

Y58 User Manual & Install Guide
Auto Loop Screen / Mode
/ Channel /
Duration
Setup
Mode: This enables you to choose the display mode, whether channels will be displayed in
single, quad or 9-split mode.
1x1
2x2
Channel: The drop-down lists are shown on-screen according to the grid layout mode
selected. You can easily choose each camera channel to be displayed in the selected grid
segment visually. If you have less cameras than available grid segments, then those segments
associated with an actual camera will be displayed as a black box. The drop-down list will
show for all connected cameras.
Duration: This numeric text field allows you to specify the duration (in seconds) for which this
layout will be displayed on the screen.
Save Settings: The (OK) button allows you to save the settings for this screen layout.
Back to Previous: The (Cancel) button allows you to return to the previous screen.
This displays a list of screens layouts that have been configured in the
device. If Auto-Loop is enabled, each of the screen layouts is displayed
/ for the specified duration, and the display will cycle iteratively and
repeatedly through the list of screen layouts.
Clicking the (
associated screen layout.
: Single camera on the screen
: Four cameras on the screen in 2x2 (quad) grid layout
) button will allow you to edit the settings of the
89 of 148