Snap Setting - Gatekeeper Y58 User Manual & Installation Manual

Y58 User Manual & Install Guide

6.5.2 Snap Setting

This subsection enables you to view and edit the triggers and settings for capturing snapshots. Make
sure to checkmark the Time Snap option to be able to setup options.
Snap Setting
Navigate to: Main Menu
Time Snap
DEFAULT SETTINGS:
Fahrenheit(F)
Setup Collection
Checkbox – if selected, this feature allows you
to set up a schedule to capture snapshots using
the cameras.
Clicking the (Add) button will add a snapshot
schedule task to the displayed task list with the
following settings that you can edit:
Start Time – this is a time field that
allows you to set the starting time to
begin taking the snapshots.
End Time – this is a time field that
allows you to set the ending time to
stop taking the snapshots.
x – you can always click the (x) button
to remove the associated snapshot
task from the list.
– this button will display the
snapshot link set screen where you can
edit the configuration settings for the
snapshots taken during this snapshot
task.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop-down list
allowing you to select a particular
camera channel.
snapshot settings for this channel will
be displayed for editing.
Enable – if the checkbox is selected,
then this camera channel is included
when the Y58 performs the snapshot
task.
Resolution – this drop-down list
enables you to select the resolution for
the snapshots. Available options are
Snap Setting
The associated
107 of 148