Operating The Comfort Control Unit; Working Conditions; Function Keys; Putting The Unit Out Of Operation - Kessel Pumpfix F Comfort Instructions For Assembly, Operation And Maintenance

4.1 Working conditions diode display
Readiness for operation
Flap closes
Backwater
Flap is closed
Pump against
Backwater

4.2 Function keys

The alarm can be acknowledged by pres-
Alarm key
sing the alarm key. The alarm-LED flas-
hes and thus indicates to the operator that
the fault is still pending.
The pump can be actuated manually e.g.
Test key
for maintenance purposes.
The pump is switched on by pressing the
test key.
When the pump is running, the pump LED
flashes.

4.3 Putting the unit out of operation

After the mains plug has been disconnec-
Caution:
ted, the alarm key must be pressed for
at least 5 seconds until the signal is so-
unded. This is to go easy on the battery.

4. Operating the Comfort control unit

Power-LED
Alarm-LED
Power-LED
Alarm-LED
Backwater-LED orange
Flap-LED
Pump-LED
Power-LED
Alarm-LED
Backwater-LED orange
Flap-LED
Pump-LED
Acoustic signal
Power-LED
Alarm-LED
Backwater-LED orange
Flap-LED
Pump-LED
Acoustic signal
Power mode
green lit
red off
green lit
red off
flashing
orange flashing
orange off
green lit
red off
flashing
orange lit
orange off
Intermittent sound
green lit
red off
flashing
orange lit
orange lit
Intermittent sound
27
Battery mode
off
flashing (1 sec. Takt)
off
off
off
flashing (1 sec. Takt)
off
off
off
flashing
off
off
Intermittent sound
off
off
flashing
off
off
Intermittent sound