3.
Assembly
3.1.
Assembling the control unit
• Disconnect the mains. Open the housing by undoing the two
screws <29> (anticlockwise) and lifting up the housing cover.
• Assemble the housing at the intended location, using both
fastening options. A drilling template is included in the delivery
scope.
• Lead out the USB connection, if present (see 7.4.3).
• Close the housing cover and tighten the two screws <29>
(clockwise).
3
2018/06
Caution: risk due to electrical current! The control unit must be disconnected from the mains
before opening.
Duo
1
1
1
19mm
= 4mm
3Nm
≈
ASSEMBLY
2
2
15mm
3 3
= 1-2mm
43/68
29
[5]
1Nm
≈