Display
4. Operating the Comfort control unit
Description
The maximum number of motor-dri-
ven flap closures within a certain pe-
riod is displayed.
The period between two self-diagno-
sis tests (SDS) is displayed.
The power-up delay of the pump is
displayed.
The run-on time of the pump is dis-
played.
The maximum pump cycles are dis-
played
The maximum pump cycles are dis-
played
Information
Default value is 30.
Default value is 28 days.
This information is for KESSEL customer ser-
vice partners.
After this fault has been acknowledged, the
fault message will be repeated following a furt-
her 1000 cycles.
Maximum pump current is displayed.
32