Canon MultiPASS L60 User Manual page 122

4. Press START/COPY.
N
You can also use coded speed dialling to send a document to more than
one location at a time. For details, see "Sequential Broadcasting" on
page 6-31.
5-18
Speed Dialling
If you do not press the START/COPY button within five
seconds of entering the coded speed dialling code, the
MultiPASS L60 will begin sending automatically. If you do not
want the MultiPASS L60 to send automatically, you need to
change the AUTO START TX setting. See pages 13-8 and 13-9
for more details.
If an error occurs during sending, the MultiPASS L60 will print
an error report. If this happens, try sending the fax again. See
"Faxing Problems" on page 11-21 for details about errors.
Chapter 5