Installing/Replacing The Toner Cartridge - Canon MultiPASS L60 User Manual

Installing/Replacing the Toner Cartridge

The MultiPASS L60 uses a Canon FX-3 toner cartridge. The procedure
below explains how to install the cartridge for the first time, and how to
replace it when the toner runs out.
When the message CHANGE CARTRIDGE appears, the toner in the
cartridge may simply be unevenly distributed. Before replacing the
cartridge, follow the instructions on page 11-33 to evenly distribute the
toner. If after doing this the message remains displayed or the print
quality is low, replace the cartridge as described below.
N
Canon makes numerous cartridges. The FX-3 toner cartridge has been
designed specially for the MultiPASS L60 and is the only one Canon
recommends that you use.
1. Remove any documents and/or printed pages from the unit.
2. Make sure the MultiPASS L60 is plugged in.
3. Open the front cover by pressing the release latches on the sides of
the unit.
Lift the cover forward to its open position.
2-29
Chapter 2 Setting Up Your MultiPASS L60