Sending Documents; Manual Sending Via The Handset - Canon MultiPASS L60 User Manual

Sending Documents

This section describes the different ways to send faxes with the
MultiPASS L60.

Manual Sending Via the Handset

If you have the optional handset or a telephone connected to your
MultiPASS L60, you can send faxes manually. This allows you to talk to
the other party before sending the fax, which can be useful if the other
party uses a single line for both voice and fax transmissions.
N
Be sure to adjust the document feed lever before loading your
document. See page 6-6 for details.
1. Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).
2. Lift the handset and dial the number
6-18
Sending Faxes
Once the document is loaded, the LCD display shows the
following:
Currently used memory:
If necessary, you can adjust the resolution and contrast. See
page 6-13 for details.
Use one of the dialling methods described on page 6-17.
Current resolution:
Standby to scan:
Ex:
MEMORY USED 0%
STANDARD
DOCUMENT READY
LINE IN USE
TEL= 2 887 0166
Chapter 6