Canon MultiPASS L60 User Manual page 158

10. Press START/COPY again, then use < < or > > to select whether or not
the unit redials when a transmission error occurs.
11. Press START/COPY.
12. Press START/COPY again, then if you selected ON in step 10, use
< < or > > to select which pages are sent when an error occurs.
Resends the first page of the document
and the pages from where the error
occurred.
Resends from the page the error occurred
on.
Resends all the pages of the document.
13. Press START/COPY to save your selection, then press STOP to
return to standby mode.
6-30
Sending Faxes
Select ON to redial when a transmission error occurs; select OFF
to cancel redialling when a transmission error occurs.
The default setting is ON.
The default setting is ERROR & 1st PG.
ON
OFF
RESEND TX FROM
ERROR & 1ST PG
ERROR PAGE
ALL PAGES
14:30 FaxOnly
Chapter 6