Canon MultiPASS L60 User Manual page 311

q R Button
This button can be used when the handset is connected to a PBX or a
System 'X' exchange. The R button is used to obtain a second line to
the PBX while holding the original line (for example, when transfer-
ring a call from one extension to another or when using some of the
new features of the System 'X' exchange*). See your PBX user guide,
or contact your service provider** for details. See also page 8-2 of this
user's guide.
w Ringer Switch
The ringer switch allows you to select the ring volume of the handset
for incoming calls. Set to HI, LO, or OFF according to your
preference.
e Tone/Pulse Switch
The handset is designed to operate on both Multi-Frequency (Tone)
and Loop Disconnect (Pulse) telephone lines.
The tone/pulse switch enables you to switch from tone dialling to
pulse dialling or vice versa. Contact your service provider** for
further information.
Use a pointed instrument to set this switch to P (pulse dialling) or T
(tone dialling).
r Numeric Buttons
Use the numeric buttons to dial the number of the party you wish to
call.
Button
Press this button to enter a pause between numbers. (For pulse
dialling only.)
# Button
Press this button to redial the last number you called. (For pulse
dialling only.)
* System 'X' exchange features include B.T. STAR SERVICES (UK only), THREE
WAY CALLING, and CALL WAITING.
** UK only: Service providers are either British Telecom, Kingston Upon Hull City
Council, Mercury Communications or your PBX supplier or maintainer.
Appendix B
B-7
Options