Using Coded Speed Dialling - Canon MultiPASS L60 User Manual

Using Coded Speed Dialling

Once you have registered your numbers under coded speed dialling
codes, you can send documents as follows:
N
Be sure to adjust the document feed lever before loading your
document. See page 6-6 for more details.
1. Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).
2. Press CODED DIAL.
3. Use the numeric buttons to enter the two-digit code assigned to the
fax number.
Chapter 5
If necessary, you can adjust the resolution and contrast. See
page 6-13 for more details.
The name registered under that coded speed dialling code is
displayed. If no name is registered, the number registered
under that code will be displayed.
If you mistakenly enter the wrong code, press the STOP
button. Then press the CODED DIAL button and enter the
correct code.
If no fax number is assigned to the coded speed dialling code
you press, the LCD displays NO TEL #. If this happens, make
sure you entered the correct code and that the number you
want to dial is registered under that code.
03
TEL=CANON U.S.A
5-17
Speed Dialling