Network Fax/Tel Switching (Australia Only); Setting The Multipass L60 For Network Switch - Canon MultiPASS L60 User Manual

Network FAX/TEL Switching (Australia Only)

Telstra offers the FaxStream DUET capability. If you subscribe to this
service, your line is assigned two numbers: one for fax and one for
phone. When the fax number is called, the network sends a specific
ringing tone which your unit recognises and automatically handles as a
fax call. If the phone number is called, a different ringing tone is sent out
from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller's end.
Triple ring (short-short-short) for fax receiving.
Three short rings, at regular intervals.
Any ring except triple ring (depending on your switchboard) for
telephone conversation
N
When you select NET. SWITCH from the RX MODE setting in the
RX SETTINGS menu, the receive mode will be locked on Fax/Tel
Mode. You will be unable to change the receive mode with the
RECEIVE MODE button.
You can also set the MultiPASS L60 for network FAX/TEL
switching from the MultiPASS Desktop Manager. See the
MultiPASS Desktop Manager User's Guide for details.

Setting the MultiPASS L60 for Network Switch

Follow these steps to select NET. SWITCH.
1. Press FUNCTION.
Use < < or > > to select RX SETTINGS.
2.
Press START/COPY, then use < < or > > to select RX MODE.
3.
Chapter 7
FUNCTION
RX SETTINGS
RX MODE
7-13
Receiving Faxes