Analog Harness (H3), 18-Pin White Connector; Xcrs Harness (H4), 8 Thick-Gauge Wires (Relay Pack) - Directed XPRESSSTART ONE Installation Manual

Analog harness (H3), 18-pin white connector

* These outputs are configurable by the installer when the module is flashed, and are low current. Use a relay if
necessary.
Conn./Pin Color
H3/1 LT. BLUE/RED
H3/2 WHITE/BLACK
H3/3 GRAY
H3/4 BLACK/WHITE
H3/5 GRAY/BLACK
H3/6 VIOLET/WHITE
H3/7 DARK BLUE
H3/8 BROWN/BLACK
H3/9 RED/WHITE
H3/10 GREEN/GRAY
H3/11 VIOLET/GRAY
H3/12 BLUE/RED
H3/13 LIGHT BLUE
H3/14 BLUE/BLACK
H3/15 DARK GREEN
H3/16 LIGHT BROWN
H3/17 BROWN
H3/18 BLUE/WHITE

XCRS harness (H4), 8 thick-gauge wires (relay pack)

* These outputs are configurable by the installer when the module is flashed.
** The Green wire is only required for starter kill and antigrind connections.
Conn./Pin Color
H4/1 PINK/WHITE
H4/2 RED/WHITE
H4/3 PINK
H4/4 RED
H4/5 ORANGE
H4/6 RED
H4/7 GREEN
H4/8 VIOLET
7
Description
No connection
(-) PARKING BRAKE INPUT (Manual transmission)
(-) HOOD INPUT
(-) NEUTRAL SAFETY SWITCH INPUT (Automatic transmission)
(+) GLOW PLUG INPUT
AC TACH INPUT
(-) UNLOCK OUTPUT*
(-) HORN*
(-) TRUNK OUTPUT*
(-) DOOR INPUT
(+) DOOR INPUT
No connection
(-) TRUNK INPUT
No connection
(-) LOCK OUTPUT*
(+) BRAKE INPUT
(+) SIREN OUTPUT
(-) ACTIVE WHILE RUNNING (STATUS) OUTPUT*
Description
(+) IGNITION 2 / FLEX RELAY OUTPUT*
(+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT
(+) IGNITION OUTPUT (also input to Yellow in ribbon cable)
(+) 12 VOLT INPUT
(+) ACCESSORY OUTPUT
(+) 12 VOLT INPUT
STARTER INPUT (from key switch)**
(+) STARTER OUTPUT (to starter)
XpressStart ONE 4x10/5x10 Analog
© 2013 Directed. All rights reserved.