Directed DBALL2 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Remote Starter
  5. DBALL2
  6. Installation manual

Directed DBALL2 Installation Manual

Hide thumbs Also See for DBALL2:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
Platform: DBALL2
Firmware: MIT2
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
The MIT2 firmware for DBALL2 is an all-in-one door lock and override module compatible with
specific Mitsubishi vehicles.
This module can only be flashed and configured using XpressVIP at www.directechs.com or
using the Directechs Mobile application for smartphones. Refer to the Module Programming
section on page 5 for more information.
Index
Vehicle Application Guide...................................................................................................................................................
Installation (Wiring Diagram & Vehicle Wiring Reference Chart)........................................................................................
Programming
Module Programming.........................................................................................................................................................
Module Reset.....................................................................................................................................................................
Hard Reset.........................................................................................................................................................................
Feature & Option List..........................................................................................................................................................
Feature Programming.........................................................................................................................................................
LED Diagnostics & Troubleshooting...................................................................................................................................
Limited One-Year Consumer Warranty...............................................................................................................................
Quick Reference Guide......................................................................................................................................................
® Mitsubishi is a registered trademark and property of its respective company.
Rev.: 20170620
02
03
05
06
06
07
07
08
10
11
© 2017 Directed. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DBALL2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Directed DBALL2

Summary of Contents for Directed DBALL2

  • Page 1: Table Of Contents

    Installation Guide The MIT2 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Mitsubishi vehicles. This module can only be flashed and configured using XpressVIP at www.directechs.com or using the Directechs Mobile application for smartphones.

  • Page 2: Vehicle Application Guide

    • Legend: DL: OE Door Lock & Alarm Controls FOB: Sync CAN Interface w / FOB Remote PK: Transponder & Immobilizer Override RS: Engine Start & Status SS: Entry Point Status-Security ST: Function/Feature Status © 2017 Directed. All rights reserved.

  • Page 3: Installation (Wiring Diagram & Vehicle Wiring Reference Chart)

    Connect Lock wire only if ignition controlled locks feature is active. This feature is configurable in your remote starter. Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector. © 2017 Directed. All rights reserved.
  • Page 4 Black/White C-418 connector, at fuse box in driver dash. White Parking Lights (left) White/Black C-418 connector, at fuse box in driver dash. White Starter Violet C-420 connector, at fuse box in driver dash. White © 2017 Directed. All rights reserved.

  • Page 5: Module Programming

    OFF once the module has been successfully programmed. Flashes x3 secs ENGINE PUSH START Press the Push-to-Start button one more time to turn ignition OFF. STOP Press 1x You have successfully completed the module programming sequence. © 2017 Directed. All rights reserved.

  • Page 6: Module Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds & until the LED starts to flash orange and red. Solid Flashes & Release the programming button. The LED turns ON solid red. Release Solid © 2017 Directed. All rights reserved.

  • Page 7: Feature & Option List

    No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. © 2017 Directed. All rights reserved.

  • Page 8: Led Diagnostics & Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to "Installation (wiring Flashes red MUX not detected. diagrams & vehicle wiring reference charts)" to check the connections. © 2017 Directed. All rights reserved.
  • Page 9 The smart key was not detected, which prevents the Flashes red Smart key was not detected. system from shutting down the vehicle. The vehicle was detected as moving, which prevents the Flashes red Speed was detected. system from shutting it down. © 2017 Directed. All rights reserved.

  • Page 10: Limited One-Year Consumer Warranty

    Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete...

  • Page 11: Quick Reference Guide

    Nothing to do but put the gear in drive and enjoy your vehicle. This unique feature monitors a variety of parameters such as the key fob, vehicle speed sensor and door sensor, in order to perform takeover securily. © 2017 Directed. All rights reserved.
  • Page 12 3 times, then to activate x3 + the panic mode. Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. © 2017 Directed. All rights reserved.

Table of Contents

Save PDF