Directed XpressKit DBALL2 Installation Manual

Directed XpressKit DBALL2 Installation Manual

Hyundai4
Hide thumbs Also See for XpressKit DBALL2:

Advertisement

Platform: DBALL2
Firmware:
HYUNDAI4
Update Alert: Firmware updates are posted
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
This guide supports the installation of a
offers
three (3)
configuration options to control your system:
Kit or SmartStart (
both
sold separately).
Remote Start Ready (
completely on its own. Consequently, there is no need for an aftermarket or an
start the vehicle from a distance.
Important!
This product is
NOT
Index
.................................
Installation
(Wiring Diagram & Vehicle Wiring Reference Chart )
Type 1..............
..........................................................................
Type ..............
2
..........................................................................
Programming
Notes..................................................................................................................................................................................
.......................................................................
Module Reset.. ................................................................................................................................................................
...
Reset.. ................................................................................................................................................................
...
Feature & Option List..........................................................................................................................................................
Feature Programming.........................................................................................................................................................
LED Diagnostics & Troubleshooting...................................................................................................................................
Parking Lightg Error Codes................................................................................................................................................
Quick Reference Guide......................................................................................................................................................
SmartStart is equipped with D2D which means it can be connected to an interface module and used in
Start Ready (
information.
® Hyundai is a registered trademark and property of its
Remote Start Ready
DBALL
2 in Remote Start Ready (
RSR
) is a function that enables the interface module to remote start the vehicle
compatible with vehicles equipped with a manual transmission.
.......
...............................
s
Warranty.......................................................................................................................
,
) mode
without
the use of
respective compan
y.
(RSR)
Installation
on
the web on a regular basis. We recommend
RSR
) mode. This solution
3x
OEM
Lock Remote Start Activation,
..................
s
.....
..........................................
.....
..........................................
......................
..........
a remote starter.
See the
Module Programming
RF
OEM
remote starter in order to
......................................................
..........................................
..........................................
.......
...........................................
section for more
© 2017 Directed. All rights reserved.
Rev.: 20170814
....
02
03
05
07
08
09
....
09
10
11
12
14
........
15
16
Remote

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XpressKit DBALL2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Directed XpressKit DBALL2

  • Page 1: Table Of Contents

    SmartStart is equipped with D2D which means it can be connected to an interface module and used in Remote Start Ready ( ) mode without the use of a remote starter. See the Module Programming section for more information. ® Hyundai is a registered trademark and property of its respective compan © 2017 Directed. All rights reserved.
  • Page 2: Vehicle Application Guide

    PK: Transponder & Immobilizer Override •: D2D & Wire-to-Wire (W2W) AV: Horn & Lights Controls DL: OE Door Lock & Alarm Controls RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status © 2017 Directed. All rights reserved.
  • Page 3 (+) Accessory: Installation Notes for more information. Yellow, in (+) Ignition: Green, in 21 With the exception of the OB II Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 4: Type 1

    White/Orange Data EM11, driver kick panel. Black B-CAN High Blue Data MF11, driver kick panel. White 48 B-CAN Low Data MF11, driver kick panel. White 48 Locating components in the vehicle Driver Kick Panel © 2017 Directed. All rights reserved.
  • Page 5 (+) Ignition: Green, in 25 EM11 (Red or White conn. in driver kick panel) With the exception of the OB II Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 6 White/Orange 19 Data EM11, driver kick panel. Red or White 58 B-CAN High Blue 29 Data MF11, driver kick panel. White B-CAN Low Red 39 Data MF11, driver kick panel. White Locating components in the vehicle Driver Kick Panel © 2017 Directed. All rights reserved.
  • Page 7 Combination Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information. & SmartStart Combination Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information. © 2017 Directed. All rights reserved.
  • Page 8: Module Programming

    Solid Green or Flashes Orange x3 sec Press the Push-to-Start (PTS) button once more to turn the ignition OFF. ENGINE PUSH START STOP You have successfully completed the module programming sequence. © 2017 Directed. All rights reserved.
  • Page 9: Module Reset

    Wait 3 seconds until the LED turns solid orange , and w 10 more seconds & until the LED starts to flash orange red. Solid Flashes & Release the programming button. The turns solid red. Release Solid © 2017 Directed. All rights reserved.
  • Page 10: Feature & Option List

    Smart OEM Alarm Control will also monitor the remote starter actions so that the factory alarm control is not done twice. A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user. © 2017 Directed. All rights reserved.
  • Page 11: Feature Programming

    2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the will turn orange for 2 seconds to confirm the end of the programming sequence. © 2017 Directed. All rights reserved.
  • Page 12: Led Diagnostics & Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to "Installation (wiring Flashes red MUX not detected. diagrams & vehicle wiring reference charts)" to check the connections. © 2017 Directed. All rights reserved.
  • Page 13 The smart key was not detected, which prevents the Flashes red Smart key was not detected. system from shutting down the vehicle. The vehicle was detected as moving, which prevents the Flashes red Speed was detected. system from shutting it down. © 2017 Directed. All rights reserved.
  • Page 14: Parking Lightg Error Codes

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2017 Directed. All rights reserved.
  • Page 15: Limited One-Year Consumer Warranty

    CLAIM OR DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER ’S...
  • Page 16: Quick Reference Guide

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2017 Directed. All rights reserved.
  • Page 17: Smartstart Compatible

    Now you can remote start, lock and unlock your car just by pushing a button on your smartphone; using the SmartStart App from Directed, the leader in vehicle Note that the information below is for Viper, Clifford and Python models. Icons and security and remote start.
  • Page 18 Notes § If the engine fails to shut down due to some malfunction, EIPS will go into alarm mode will notify the user by all means possible (e.g. h or s iren © 2017 Directed. All rights reserved.

Table of Contents