Directed DS4+ Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Remote Starter
  5. DS4+
  6. Installation manual
Directed DS4+ Installation Manual

Directed DS4+ Installation Manual

2010 toyota camry (smart key). 933.tl1 5.03.185
Hide thumbs Also See for DS4+:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
INSTALLATION GUIDE
DS4+
2010 Toyota Camry (Smart Key). 933.TL1 5.03.185
Designed by Installers for Installers
© 2017 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS4+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Directed DS4+

Summary of Contents for Directed DS4+

  • Page 1 2010 Toyota Camry (Smart Key). 933.TL1 5.03.185 Designed by Installers for Installers © 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings OEM remote starter detection Wiring diagram Locating components in the vehicle Vehicle connections Connecting the module Important! RF Systems 8556T Temperature Sensor 8504D Combo Sensor When used in conjunction with SmartStart D2D port configuration Module programming LED diagnostics and troubleshooting...
  • Page 3 The following safety warnings must be observed at all times: • Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. • When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an area that does not have adequate ventilation.

  • Page 4: Introduction

    Factory Alarm Trigger Monitoring Immobilizer Bypass-Data No Key Req'd Brake Status (foot brake) 3x LOCK START (Start control using OEM Remote) E-Brake Status Accessory Activation Ignition Status Ignition Activation SmartStart 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    The siren is ONLY required when enabling the security features during module flashing. Autolights Interrupt ONLY required if vehicles are equipped with Autolights. Connection required ONLY if Pit Stop/Idle mode is desired. 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 6: Oem Remote Starter Detection

    STARTER If the vehicle is equipped with an add-on Lexus/Toyota OEM remote starter The factory remote starter must be permanently disconnected before programming the Directed interface as both modules cannot coexist. See "Locating the OEM Remote Starter" below. Locating the OEM Remote Starter Vehicle OEM Remote Starter &...

  • Page 7: Wiring Diagram

    (+) 12V, Black or White, pin 1 Slide DS4+ Dash Fuse Box to open (white conn.) It is important to check that the fuses are positioned correctly. 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 8: Locating Components In The Vehicle

    Locating components in the vehicle 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 9: Vehicle Connections

    (Data) HS CAN High data link connector, black 16 pin plug, pin 6 data black H3/3 Orange/Brown No Connection No Connection H3/4 Orange/Green No Connection No Connection 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.
  • Page 10 No Connection No Connection H4/19 Blue No Connection No Connection H4/20 Green No Connection No Connection H4/21 Gray (-) Hood Switch Input H4/22 Violet/White No Connection No Connection 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.
  • Page 11 Temperature sensor harness, 2-pin black connector (H7) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Ref. H7/1 Black Temperature Sensor No Connection H7/2 Black Temperature Sensor No Connection 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 12: Connecting The Module

    DO NOT connect the SmartStart 2-pin power harness when using the DS4+. Power and ground will be provided by the D2D connector on main module. Refer to the SmartStart documentation for further details. 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 13: D2D Port Configuration

    SmartStart. To ensure proper functionality with SmartStart, it is important that it is selected in the system programming of the DirectLink application or via the online web tool. Note: Both black D2D ports are reserved for the Control Center (antenna) and 8504D Combo Sensor. 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 14: Module Programming

    "Initialize Virtual Tach (not needed with hardwired or data tach applications". * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 15: Led Diagnostics And Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to MUX not detected. “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections. Flashes red x 7 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.
  • Page 16 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 17: Soft Reset

    After 3 seconds the LED turns ON solid orange. Keep holding the programming button until & & the LED flashes red, then orange slowly. Solid Flashes Hold Release the programming button. The LED turns ON solid red. & Solid Release 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 18: Learning The Tach (Not Needed With Virtual Tach)

    Important! After successfully learning Virtual Tach, a small minority of vehicle starters may over crank or under crank during remote start. Use the VirtualTach Fine tune feature in the configuration wizard to adjust the starter output time in 50mS increments to compensate for such an occurrence. 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

  • Page 19: Limited Lifetime Consumer Warranty

    Directed dealer, the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address;...

  • Page 20: Quick Reference Guide

    The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.
  • Page 21 Notes 933.TL1 5.03.185 2010 Toyota Camry (Smart Key) © 2017-10-17 Directed. All rights reserved.

Table of Contents

Save PDF