Programmable Outputs - Default Values - Directed XPRESSSTART ONE Installation Manual

Output
Pulse After Ignition Off
(pulse duration = 1 min.)
Accessory
Ignition
Starter
Parking Lights
Rear Defroster
Dome Light
Horn
Active When Alarm Trig-
gered
Anti-Grind
Important!
All outputs (except
Connecting directly to
If you use it with a high-current device, the output must be set to an internal relay (Relay 1, Relay 2, Flex Relay) or
connected to an additional external relay.
Programmable outputs – Default values
Harness/Pin Wire Color
H2/12 (+) White/Red
H2/11 (-) White/Violet
H4/1 (+) Pink/White
H3/8 (-) Brown/Black
H3/18 (-) Blue/White
See H1 table on
H1/Relay 1
page 6
See H1 table on
H1/Relay 2
page 6
15
Description
Supplies a 1-minute output every time the ignition is turned off using the key.
Controls an additional Accessory wire on the vehicle.
Controls an additional Ignition wire on the vehicle.
Controls a second Starter wire on the vehicle.
Provides an output for a connection to the vehicle lighting system.
Provides an output each time a Defroster request is received or the Defroster button is pressed (depending on
the remote control model). See the Feature Programming for Defroster).
Supplies a 30-second output after a Disarm command is received (see the Feature Programming for Dome
Light). Additionally, this wire will pulse periodically during an alarm trigger.
Provides an output for the Horn (see the Feature Programming for Horn).
Supplies an output as long as the module security is triggered.
Supplies an output as long as the system is armed and/or remote started.
Relay 1, Relay
a solenoid, motor,
Default Function
Aux 1
Aux 1
Ignition 2
Horn
Active when running
N/A
N/A
2 and Flex Relay)
or other high-current
Notes
Allows for positive and/or negative control to low-current devices from a single
function
Flex relay output. The default value is Ignition 2. Can be configured as Acces-
sory 2 or Start 2
can only supply 200
device will cause it
XpressStart ONE 4x10/5x10 Analog
© 2013 Directed. All rights reserved.
mA.
to fail.