Table of Contents
Advertisement
Assembly/Disassembly
Remove PCB Cover Plate from Printer Mechanism Assembly
Figure 19; Remove PCB Cover Plate
1.
Loosen completely the four (4) thumbscrews that retain the PCB Cover Plate.
2.
Lift the PCB Cover Plate away from the Printer Mechanism Assembly.
3.
Unplug the Ticket Low Sensor Assembly form the Main Controller PCB.
4.
Repeat the steps in reverse to re-install the PCB Cover Plate.
Mar-03
Confidential Information: Not for Distribution.
Series 800 Maintenance Manual
Rev C
Page
27
Advertisement
Table of Contents
