Winch Control Switch - BRP CAN-AM OUTLANDER 6x6 2017 Series Operator's Manual

CONTROLS
This switch selects 4 wheel drive or 6
wheel drive mode when the vehicle is
stopped and the engine is running.
NOTICE
The
stopped to engage or disengage
4WD/6WD switch. Mechanical dam-
age may occur if switch is engaged
or disengaged while driving.
The 6WD mode is engaged when the
switch is pushed downwards.
SFV07i0Dy2
6WD MODE - TYPICAL
The 4WD mode is engaged when the
switch is pushed upwards. The vehicle
is then rear wheel drive only.
SFV07i0ey2
4WD MODE - TYPICAL
While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
______________
92
vehicle must

9) Winch Control Switch

This switch controls the winch opera-
tion.
be To let out the cable, press the left side
of switch.
To reel in the cable, press the right side
of switch.
vmo2016-022-030_f
TYPICAL
1. In
2. Out
NOTE: Using the winch intensively
over a long period of time may dis-
charge the battery.
BASIC GUIDE TO WINCHING
Refer to
TECHNIQUES
structions.
WARNING
for proper operating in-