Leds; Power And Fault Leds; Figure 17: Power Led On A Gs970M Series Switch - Allied Telesis CentreCOM GS970M Series Installation Manual

Chapter : Chapter 1: Overview

LEDs

POWER and
FAULT LEDs
32
This section describes the four types of LEDs on GS970M Series
switches:
"POWER and FAULT LEDs" on page 32

"10/1000BASE-T/100BASE-TX Link/Activity/Speed LED and PoE

status LED" on page 34
"10/1000BASE-T/100BASE-TX Link/Activity/Speed LED and

Duplex/Collision LED" on page 36
"SFP LEDs" on page 38

"SD card LED" on page 39

The POWER LED reports the status of AC power and is located on the
front panel of the of the switches beside the console port. See Figure 17.
Note
All port LEDs are OFF when the switch is operating in the low power
mode. To toggle on the LEDs, use the ecofriendly button. See
"ecofriendly button" on page 41 for more information.
F 17. POWER LED
IGURE
ess Label
D
Power LED
GS970M S
ON A ERIES
CONSOLE
SD
FAULT
POWER
RS-232
1000 LINK ACT
S
WITCH
1
2
10/100 LINK ACT