Installing A Gs970M/10Ps Switch In An Equipment Rack; Figure 32. Attaching Rack Mount Brackets To Ags970M/10Ps - Allied Telesis CentreCOM GS970M Series Installation Manual

Installing a GS970M/10PS switch in an equipment rack

These instructions show you how to install a GS970M/10PS switch in an
equipment rack. The rack mount kit is AT-RKMT-J14 and can be
purchased separately from your Allied Telesis dealer.
To install a GS970M/10PS switch in a 19-inch equipment rack, follow
these steps:
1. If rubber feet are attached to the base of the switch, remove them
(Figure 25 on page 55).
2. Attach two rack mount brackets to the sides of the switch using the
eight bracket screws that come with the rack mount kit AT-RKMT-J14
(Figure 32).
F 32. A
IGURE TTACHING RACK MOUNT BRACKETS TO A
M A
C A
d d r
e s s
L a b
e l
S D
C O
N S
O L
E
1
3
S D
R S
- 2 3
F A
2
U L
5
T
P O
W E
R
1 0 0 7
0 L
IN K
A C
T
2
1 0 /1
0 0
L IN
K
4
A C
T
6
8
P D
O N
S F
P
9
P D
E R
R
M A
X C
1 0
U R
R E
N T
GS9790M Series Switch Installation Guide
GS970M/10PS
59