Figure 39: Securing The Gs970M/10 Switch To The Wall With The Front Panel Facing Up; Figure 40: Securing The Gs970M/10 Switch To The Wall With The Front Panel Facing Right - Allied Telesis CentreCOM GS970M Series Installation Manual

Chapter : Chapter 2: Installation
F 39. S
IGURE ECURING THE
Bracket position, viewed from above:
F 40. S
IGURE ECURING THE
Bracket position, 
viewed from above:
66
GS970M/10
SWITCH TO THE WALL WITH THE FRONT PANEL FACING UP
GS970M/10
SWITCH TO THE WALL WITH THE FRONT PANEL FACING RIGHT
3. Slide the switch between the brackets so that it rests against the
bracket, as shown in the figures above.
4. Go to "Cabling the switch" on page 69.
Bracket position, viewed from below:
Bracket position, 
viewed from below: