Removal Of Fan And Motor - Gree U-Match 5 Series Manual

GREE
Model: GUD100W/NhA-T, GUD125W/NhA-T, GUD140W/NhA-T, GUD100W/NhA-X, GUD125W/NhA-X,
GUD140W/NhA-X
Step
1. Remove the grill.
2. Remove the fan.
3. Remove motor.
4. Install the motor.

Removal of fan and motor

Note: Before removing the fan, make sure power is cut off.
U-Match 5 SERIES UNIT SERVICE MANUAL
Picture
123
Work instruction

Use a screwdriver to
unscrew the two screws
on the upper left and lower
right corners.

Use a wrench to remove
the specialized nut and
gasket of the fan.
Note: Please keep the nut
and gasket safe after
removing them from the
fan.

Use a screwdriver to
unscrew the bolt of motor.
Note: Motor wire should
be first removed from the
electric box.

Replace with a new motor.
Then tighten up the screw
bolt.