Gree U-Match 5 Series Manual page 111

GREE
Step
8. Install the grill.
9. Install the front side plate.
10. Install the upper cover plate.
Model: GUD35W/NhA-T, GUD50W/NhA-T, GUD71W/NhA-T, GUD85W/NhA-T
Note: Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
Step
1. Remove wires.
Removal of front panel
Note: Before removing the front panel, make sure power is cut off.
Removal of compressor
U-Match 5 SERIES UNIT SERVICE MANUAL
Picture
Picture
108
Work instruction

Attach the grill back in place
and tighten up the screws.

Tighten up the screws
around the front side plate.

Tighten up the screws
around the upper cover
plate.
Work instruction

Loosen the securing screws
of the wires with a
screwdriver.

Remove the wires.
Note: When removing the
wires, mark the wire
terminals corresponding to
their color so as to avoid
misconnection.