Indoor Unit; Removal And Assembly Of Fan Motor; Separate The Motor - Gree GWHD(48S)NM3CO Service Manual

Super Free Match
Service Manual

6.2 Indoor unit

6.2.1 Wall mounted type

◆ Removal and Assembly of Fan Motor

Remark: Prior to the assembly of the motor, make sure the power supply is cut off.
Steps
1.Remove the front
panel, front case and
electric box
2.Remove the evaporator
3.Remove the motor and
cross flow fan
6.2.2 Ducted type
◆ Removal and Assembly of Fan Motor
Remark: Prior to the assembly of the motor, make sure the power supply is cut off.
Steps
1.Pull out the
electric wire of the
motor
MAINTENANCE 152
Illustrations
Illustrations
Operation Instructions
a) Loosen the screws；
b) Unplug the motor
terminals in the
electric box. Loosen
the earth screws and
lift up
Unscrew the fixed screws
of the evaporator, and
then remove it
a) Unscrew the fixed
screws of the motor
press plate and cross
flow fan
b)

Separate the motor

from the cross flow
fan.
Operation Instructions
Open the cover plate of the
electric box and then pull
out the electric wire inside
the box.