GREE
Step
2. Remove the fan.
3. Remove motor.
4. Install the motor.
5. Install the fan.
6. Install the grill.
Removal of fan and motor
Note: Before removing the fan, make sure power is cut off.
U-Match 5 SERIES UNIT SERVICE MANUAL
Picture
112
Work instruction
Use a wrench to remove the
specialized nut and gasket of
the fan.
Note: Please keep the nut
and gasket safe after
removing them from the fan.
Use a screwdriver to unscrew
the bolt of motor.
Note: Motor wire should be
first removed from the
electric box.
Replace with a new motor.
Then tighten up the screw
bolt.
Install the fan in place. Put on
the gasket and use a wrench
to secure the screw nut.
Note: After installing the fan,
turn the fan by hand to see if
it can run normally. If not,
please check for the reason.
After replacing the motor, use
a screwdriver to tighten up
the screw bolt that secures
the motor.