Removal Of Compressor/Gas Liquid Separator - Gree U-Match 5 Series Manual

GREE
Step
9. Install the front side plate.
10. Install the upper cover plate.
Model: GUD100W/NhA-T, GUD125W/NhA-T, GUD140W/NhA-T, GUD100W/NhA-X, GUD125W/NhA-X,
GUD140W/NhA-X
Note: Before removing the compressor/gas liquid separator, make sure there is no refrigerant in the pipeline and power is cut off.
Step
1. Remove wires.
Removal of front panel
Note: Before removing the front panel, make sure power is cut off.

Removal of compressor/gas liquid separator

U-Match 5 SERIES UNIT SERVICE MANUAL
Picture
Picture
119
Work instruction

Fix the clasps on both sides
of the plate and tighten up
the screws.

Tighten up the screws
around the upper cover
plate.
Work instruction

Loosen the securing screws
of the wires with a
screwdriver.

Remove the wires.
Note: When removing the
wires, mark the wire
terminals corresponding to
their color so as to avoid
misconnection.