Gree U-Match 5 Series Manual page 146

GREE
Step
5. Remove the drain pipe and
loosen the screws of water
pump.
6. Remove and replace the
pump.
7. Connect the drain pipe and
tighten the screws of water
pump.
8. Install the water tray and
tighten the screws.
9. Connect the water pump
wire and power cord, and
then put back the cover of
electric box and the clamp
of power cord.
Removal and installation of drain pump
Picture
143
U-Match 5 SERIES UNIT SERVICE MANUAL
Work instruction

Take out the drain pipe and use
a screwdriver to loosen the
screws of water pump.

Remove the pump and replace
with a new one.

Connect the drain pipe and
tighten the screws of water
pump.

Direct the 4 corners of the water
tray to the 4 corners of the unit
and press them. Then use a
screwdriver to tighten the
screws.

Connect the water pump wire
and motor wire according to the
wiring diagram.

Put back the cover of electric
box and the clamp of power
cord. Then tighten the screws.