GREE
Step
3. Remove motor.
4. Install the motor.
5. Install the fan.
6. Install the grill.
Removal of fan and motor
Note: Before removing the fan, make sure power is cut off.
U-Match 5 SERIES UNIT SERVICE MANUAL
Picture
135
Work instruction
Use a screwdriver to
unscrew the bolt of motor.
Note: Motor wire should be
first removed from the
electric box.
Replace with a new motor.
Then tighten up the screw
bolt.
Install the fan in place. Put
on the gasket and use a
wrench to secure the screw
nut.
Note: After installing the fan,
turn the fan by hand to see
if it can run normally. If not,
please check for the
reason.
After replacing the motor,
use a screwdriver to tighten
up the screw bolt that
secures the motor.