Gree U-Match 5 Series Manual page 135

GREE
Note: Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
Step
4. Remove the compressor
from the chassis.
5. Fix the new compressor back
onto the chassis.
6. Connect the compressor
suction port and exhause
port with the pipes.
Disassembly of compressor
Picture
132
U-Match 5 SERIES UNIT SERVICE MANUAL

Take out the compressor
and replace it.
Note: When replacing the
compressor, avoid touching
the nearby pipeline and
components.

After replacing the
compressor, tighten up the
screws at the foot of
compressor.

Weld the compressor
connection pipes and
connect them to the
compressor.
Note: When replacing the
compressor, avoid touching
the nearby pipeline and
components.
Work instruction