Gree U-Match 5 Series Manual page 130

GREE
Note: Before removing the electronic expansion valve, make sure there is no refrigerant in the pipeline and power is cut off.
Step
2. Remove the fixed block.
3. Remove the electronic
expansion valve.
4. Take out the electronic
expansion valve.
Removal of electronic expansion valve
Picture
127
U-Match 5 SERIES UNIT SERVICE MANUAL
Work instruction

Remove the fixed block
between the electronic
expansion valve and the pipe.

Take off the coil of electronic
expansion valve.

Loosen the connection pipe
of electronic expansion valve
by welding. Then remove the
connection pipe.
Note: When welding the pipe,
do not let the flame bunt the
other components.

Take out the electronic
expansion valve.